I'm facing strange behavior of Cisco AnyConnect Secure Mobility Client. It works great when I'm using ethernet cable connection. However while trying to connect using WiFi connection - VPN client allow me to login, but after that imidiatelly it drops WiFi connection and disabling WiFi service on my laptop. Whenever Cisco Anyconnect connects successfully to a network, it will automatically open a command prompt window in the background, silently pinging google.com to receive replies back, thus allowing Network & Sharing Center to detect internet access, and resolve the yellow exclamation. The Cisco VPN supports this and actually allows account level restrictions. Additionally the clientside routes are not defined by Cisco, they're defined by the network admin deploying the production. The VPN client also comes with a separate Firewall solution that is required to be running while the VPN client is running, but can be disabled.

Cisco Anyconnect 4.8 Download Windows

Introduction

This document describes the Cisco AnyConnect Mobility Client captive portal detection feature and the requirements for it to function correctly. Many wireless hotspots at hotels, restaurants, airports, and other public places use captive portals in order to block user access to the Internet. They redirect HTTP requests to their own websites that require users to enter their credentials or acknowledge terms and conditions of the hotspot host.

Prerequisites

Requirements

Cisco recommends that you have knowledge of the Cisco AnyConnect Secure Mobility Client.

Components Used

The information in this document is based on these software versions:

• AnyConnect Version 3.1.04072
• Cisco Adaptive Security Appliance (ASA) Version 9.1.2

The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.

Background Information

Many facilities that offer Wi-Fi and wired access, such as airports, coffee shops, and hotels, require users to pay before they obtain access, agree to abide by an acceptable use policy, or both. These facilities use a technique called captive portal in order to prevent applications from connecting until users open a browser and accept the conditions for access.

Captive Portal Remediation Requirements

Support for both captive portal detection and remediation requires one of these licenses:

• AnyConnect Premium (Secure Sockets Layer (SSL) VPN Edition)
• Cisco AnyConnect Secure Mobility

You can use a Cisco AnyConnect Secure Mobility license in order to provide support for captive portal detection and remediation in combination with either an AnyConnect Essentials or an AnyConnect Premium license.

Note: Captive portal detection and remediation is supported on the Microsoft Windows and Macintosh OS X operating systems supported by the release of AnyConnect that is in use.

Captive Portal Hotspot Detection

AnyConnect displays the Unable to contact VPN server message on the GUI if it cannot connect, regardless of the cause. The VPN server specifies the secure gateway. If Always-on is enabled and a captive portal is not present, the client continues to attempt to connect to the VPN and updates the status message accordingly.

If the Always-on VPN is enabled, the connect failure policy is closed, captive portal remediation is disabled, and AnyConnect detects the presence of a captive portal, then the AnyConnect GUI displays this message once per connection and once per reconnect:

If AnyConnect detects the presence of a captive portal and the AnyConnect configuration differs from that previously described, the AnyConnect GUI displays this message once per connection and once per reconnect:

Caution: Captive portal detection is enabled by default and is nonconfigurable. AnyConnect does not modify any browser configuration settings during captive portal detection.

Captive Portal Hotspot Remediation

Captive portal remediation is the process where you satisfy the requirements of a captive portal hotspot in order to obtain network access.

AnyConnect does not remediate the captive portal; it relies on the end user to perform the remediation.

In order to perform the captive portal remediation, the end user meets the requirements of the hotspot provider. These requirements might include payment of a fee to access the network, a signature on an acceptable use policy, both, or some other requirement that is defined by the provider.

Cisco Anyconnect Blocking Internet Access

Captive portal remediation must be explicitly allowed in an AnyConnect VPN Client profile if AnyConnect Always-on is enabled and the Connect failure policy is set to Closed. If Always-on is enabled and the Connect Failure policy is set to Open, you do not need to explicitly allow captive portal remediation in an AnyConnect VPN Client profile because the user is not restricted from network access.

False Captive Portal Detection

AnyConnect can falsely assume it is in a captive portal in these situations.

• If AnyConnect attempts to contact an ASA with a certificate that contains an incorrect server name (CN), then the AnyConnect client will think it is in a captive portal environment.
  In order to prevent this issue, make sure that the ASA certificate is properly configured. The CN value in the certificate must match the name of the ASA server in the VPN client profile.
  
• If there is another device on the network before the ASA that responds to the client's attempt to contact an ASA by blocking HTTPS access to the ASA, then the AnyConnect client will think it is in a captive portal environment. This situation can occur when a user is on an internal network and connects through a firewall in order to connect to the ASA.
  If you must restrict access to the ASA from inside the corporation, configure your firewall such that HTTP and HTTPS traffic to the ASA's address does not return an HTTP status. HTTP/HTTPS access to the ASA should either be allowed or completely blocked (also known as black-holed) in order to ensure that HTTP/HTTPS requests sent to the ASA will not return an unexpected response.

AnyConnect Behavior

This section describes how the AnyConnect behaves.

1. AnyConnect tries an HTTPS probe to the Fully Qualified Domain Name (FQDN) defined in the XML profile.
   
2. If there is a certificate error (not trusted/wrong FQDN), then AnyConnect tries an HTTP probe to the FQDN defined in the XML profile. If there is any other response than an HTTP 302, then it considers itself to be behind a captive portal.

Captive Portal Incorrectly Detected with IKEV2

When you attempt an Internet Key Exchange Version 2 (IKEv2) connection to an ASA with SSL authentication disabled that runs the Adaptive Security Device Manager (ASDM) portal on port 443, the HTTPS probe performed for captive portal detection results in a redirect to the ASDM portal (/admin/public/index.html). Since this is not expected by the client, it looks like a captive portal redirect, and the connection attempt is prevented since it seems that captive portal remediation is required.

Workarounds

If you encounter this issue, here are some workarounds:

• Remove HTTP commands on that interface so that the ASA will not listen to HTTP connections on the interface.
  
• Remove the SSL trustpoint on the interface.
  
• Enable IKEV2 client-services.
  
• Enable WebVPN on the interface.

This issue is resolved by Cisco bug ID CSCud17825 in Version 3.1(3103).

Caution: The same problem exists for Cisco IOS^® routers. If ip http server is enabled on Cisco IOS, which is required if the same box is used as the PKI Server, AnyConnect falsely detects captive portal. The workaround is to use ip http access-class in order to stop responses to AnyConnect HTTP requests, instead of requesting authentication.

Disable the Captive Portal Feature

It is possible to disable the captive portal feature in AnyConnect client version 4.2.00096 and later (see Cisco bug ID CSCud97386). The administrator can determine if the option should be user configurable or disabled. This option is available under the Preferences (Part 1) section in the profile editor. The administrator can choose Disable Captive Portal Detection or User Controllable as shown in this profile editor snapshot:

If User controllable is checked, the checkbox appears on the Preferences tab of the AnyConnect Secure Mobility Client UI as shown here:

Overview

Stanford's VPN allows you to connect to Stanford's network as if you were on campus, making access to restricted services possible. To connect to the VPN from your Windows computer you need to install the Cisco AnyConnect VPN client.

Two types of VPN are available:

• Default Stanford (split-tunnel). When using Stanford's VPN from home, we generally recommend using the Default Stanford split-tunnel VPN. This routes and encrypts all traffic going to Stanford sites and systems through the Stanford network as if you were on campus. All non-Stanford traffic proceeds to its destination directly.
• Full Traffic (non-split-tunnel). This encrypts all internet traffic from your computer but may inadvertently block you from using resources on your local network, such as a networked printer at home. If you are traveling or using wi-fi in an untrusted location like a coffee shop or hotel, you may wish to encrypt all of your internet traffic through the Full Traffic non-split-tunnel VPN to provide an additional layer of security.

You can select the type of VPN you want to use each time you connect to the Stanford Public VPN.

Install the VPN client

1. Download the Cisco AnyConnect VPN for Windows installer.
2. Double-click the InstallAnyConnect.exe file.
3. When a message saying the Cisco AnyConnect client has been installed, click OK.
   

Connect to the Stanford VPN

1. Launch the Cisco AnyConnect Secure Mobility Client client.
   If you don't see Cisco AnyConnect Secure Mobility Client in the list of programs, navigate to Cisco > Cisco AnyConnect Secure Mobility Client.
2. When prompted for a VPN, enter su-vpn.stanford.edu and then click Connect.
   
3. Enter the following information and then click OK:
   • Group: select Default Stanford split- tunnel (non-Stanford traffic flows normally on an unencrypted internet connection) or Full Traffic non-split-tunnel (all internet traffic flows through the VPN connection)
   • Username: your SUNet ID
   • Password: your SUNet ID password
   
   
4. Next, the prompt for two-step authentication displays. Enter a passcode or enter the number that corresponds to another option(in this example, enter 1 to authenticate using Duo Push to an iPad). Then click Continue.
   • You may have to scroll down the list to see all of your options.
   • If your only registered authentication method is printed list, hardware token, or Google Authenticator, the menu does not display. Enter a passcode in the Answer field and click Continue.
     
5. Click Accept to connect to the Stanford Public VPN service.
   
6. Once the VPN connection is established, a message displays in the lower-right corner of your screen, informing you that you are now connected to the VPN.
   

Disconnect from the Stanford VPN

1. In the notification area, click the Cisco AnyConnect icon if it is displayed. Otherwise, go to your list of programs and click Cisco AnyConnect Secure Mobility Client.
2. At the prompt, click Disconnect.